American Standard Home Beta App - Adjusting Temperature – AS Air Home

American Standard Home Beta App - Adjusting Temperature

We encourage customers who have been invited to join the American Standard Home app beta release to use the beta version as much as possible and send your honest feedback to hello@asairhome.com.

Should you want to switch between the classic American Standard Home app experience and the beta version, you can do so easily.

The American Standard Home beta app allows you to temporarily override the temperatures set in your Home and Bedtime routines. The new experience allows you to lower or increase your setpoint up to 3° with one touch. You can also permanently override setpoints for any routine to make larger or lasting changes.

NOTE: The Away routine does not allow you to temporarily override the temperature. To change the setpoints for the Away routine, please follow the instructions to permanently change the setpoints.

How To Temporarily Override Setpoints

The temporary override options available in the app are determined by whether your HVAC system is in Heating, Cooling, or Auto mode. In Auto mode, the options are determined by the current temperature in your home.

In Heating Mode

To temporarily increase your heating setpoint, select one of the red bubbles under Warm Up.
To temporarily decrease your heating setpoint, select one of the yellow bubbles under Reduce Heating.

In Cooling Mode

To temporarily decrease your cooling setpoint, select one of the blue bubbles under Cool Down.
To temporarily increase your cooling setpoint, select one of the yellow bubbles under Reduce Cooling.

In Auto Mode

If the current temperature is below the Heating setpoint or the system is running a Heating cycle, the app will have the same options as Heating Mode above.

If the current temperature is above the Cooling setpoint or the system is running a Cooling cycle, the app will have the same options as Cooling Mode above.

If the current temperature is between your Heating and Cooling setpoints or your HVAC system is idle, you will have the option to Warm Up or Cool Down.
- - Warm Up will increase both the heating and cooling setpoints by the selected amount.
  - Cool Down will decrease both the heating and cooling setpoints by the selected amount.

NOTE: Regardless of mode, once you override the temperature, "Override" will appear in the center of the screen.

How To End a Temporary Override

Temperature changes made using the process above are temporary. By default, the temporary override will end at the scheduled start of the next routine. You can select a different end time or end the override at any time and return to your routine.

Schedule the End Time

The time the override is scheduled to end will appear at the bottom of the screen.
To end the override at a different time:
- 1. Select Schedule End.
  2. Touch the current end time.
  3. Select a new end time by scrolling up or down for hour, minute, and AM/PM. Press OK when finished.
  4. Tap Save to apply the new end time.
  5. The new end time will appear at the bottom of the screen.

End Now

Use the End Now function to immediately stop the temporary override and return to the setpoints configured in your routine.

How To Permanently Change Setpoints

For longer-lasting changes or changes of greater than 3° you can permanently modify your setpoints. There are two methods for accessing permanent setpoint changes. Once the setpoint Edit screen is accessed, the methods are identical.

Access Setpoints Using the Routine Function

1. 1. Tap the Menu icon in the upper corner of the screen.
  2. Select Routine.
  3. Choose either Away or Bedtime.
  4. Tap the temperature display under the routine name.
  5. Jump to Editing Setpoints.

Access Setpoints From the Current Routine

1. 1. Below the current temperature, select the box containing the Heating and Cooling symbols and setpoints.
  2. Jump to Editing Setpoints.

Editing Setpoints

1. 1. The three routines will appear with your current routine selected by default. If you want to modify the setpoints for a different routine, select it from the list.
  2. Select Heating, Cooling, or Auto at the top of the screen.
    - TIP: If you select Auto, you can modify the heating and cooling setpoints at the same time.
  3. Tap the arrow next to Heat To or Cool To.
  4. Select your desired temperature from the list; you can scroll up and down to see the full list.
  5. Repeat for any other setpoints you wish to change, and press Save when you are satisfied with your setpoints.

If you have any questions or need assistance, please contact American Standard Home Customer Support via email at help@asairhome.com or call 1-877-374-0697, Monday-Friday 9 AM – 8 PM ET, and Saturday 10 AM – 5 PM ET.